PRODUCT

TEMP (C)

PRESS (Kg/sqcm)

DWELL time (sec)

REMARKS

Disegno

100 - 105

100 - 150

3 - 4

 

Iresgo

100 - 110

50 - 80

4 - 5

 

Transpull

100 - 105

100 - 150

3 - 4

  

711

100 - 105

100 - 150

3 - 4

  

Crumble

100 - 105

50 - 80

 3 - 5  
OS

100 - 110

50 - 80

 4 - 5  
Optique

100 - 105

 100 - 150 3 - 4

 
Metallic

80 - 85

 50 - 100 3 - 4

Pre- Transfer treatment : 1 cross coat spray of a water based soft acrylic/PU binder (dilution 1:2) . Dry. This spray of binder is recommended if strong adhesion is required in case of application for shoes or leather goods.
Osmetic

80 - 85

 50 - 100 3 - 4

Pre- Transfer treatment : 1 cross coat spray of a water based soft acrylic/PU binder (dilution 1:2). Dry. This spray of binder is recommended if strong adhesion is required in case of application for shoes or leather goods. However no blinder spray is needed if the application is for garment leather or if used for ' crackle look'. Post- Transfer treatment : a PU lacquer top coat is recommended for full grain finish.
Adit 100 - 105 100 - 150 3 - 4  
Pull up

100 - 105

 50 - 100 3 - 5  
Patop

85 - 90

50 - 80

 3 - 5

For peeling off (separating ) the carrying film you would need to " initiate " peeling of foil by making a small scratch/cut with a knife on the portion of the foil that is not in touch with the leather ( untransfered portion around edges ). Then you can easily separate the film portion from the paper, and just peel it off.

Additional Information
1. The release paper should not be peeled until 8 hrs for best results
2. Generally a plain plate is used, however, any print plate can be used while transferring, as per your requirements e.g. Dry mill Plate, Croco Plate.
3.. After transfer you can molissa, dry mill, or kiss plate the leather to achieve any special effects/feels that you require. Water based feel modifiers can also be sprayed to achieve desired finishes.
4. Please note that the above transfer conditions & guidelines are based on our experience and trials. We however, recommend that you do small scale trials yourself to arrive at best result suited to your manufacturing environment.
5. All products are "AZO Free" and confirm to international specifications regarding use of approved chemicals only.

_________________________________________________________________________________________________________________________________

Home